Protocole Diretta

[Janacek]

Merci bear
Mais eth1 et eth2 (sorties lan de la Jcat) ne sont pas utilisés.
eth_0 c'est le lan (sfp) depuis le switch.

je n'arrive pas à faire communiquer le lan (br_0?) de la carte mère au DDC-00

depuis dmesg


[  20.643553] 8021q: 802.1Q VLAN Support v1.8
[  20.685556] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  20.687015] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  20.687118] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[  20.777040] RTL8211DN Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[  21.040663] r8169 0000:04:00.0 eth0: Link is Down
[  21.099958] 8021q: adding VLAN 0 to HW filter on device eth1
[  21.154962] 8021q: adding VLAN 0 to HW filter on device eth2
[  23.332974] r8169 0000:04:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  29.101476] diretta_alsa_ioctl DELETE ALL
[  29.814830] process 'opt/audirvana/studio/audirvanaStudio' started with executable stack
[  30.476550] r8169 0000:04:00.0 eth0: Link is Down
[  30.590429] RTL8211DN Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[  30.828203] r8169 0000:04:00.0 eth0: Link is Down
[  30.880166] 8021q: adding VLAN 0 to HW filter on device eth2
[  33.648761] r8169 0000:04:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
[  34.034762] r8169 0000:04:00.0 eth0: Link is Down
[  36.370736] r8169 0000:04:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
[  948.987753] diretta_alsa_ioctl DELETE ALL
[  967.174226] diretta_alsa_ioctl DELETE ALL

pourquoi j'ai diretta alsa delete all?