07-09-2019, 10:29 AM
Merci à vous deux pour votre retour,
chakiwi -> J'écoute vraiment de tout selon mes humeurs...
pascal -> es-tu sur que je ne puisse pas intercaler le sub entre source et ampli ? Voici ce que dit la doc du sub :
"Alternatively, especially for two-channel preamps that don’t have (or don’t use) any digital management, the typical connectivity scenario would be to use both the main channel Left and Right (L/R) inputs into the STA400D. In this case the subwoofer would sit between the main L/R low level outputs of the preamp and the L/R low level inputs of the STA-400D, with the L/R outputs of the STA-400D going to the inputs of the power amplifier for the system’s L/R main speakers"
ou encore
"Outputs
There are two sets of output connectors on the STA-400D. One set (labeled Line Out) is unfiltered and carries the same signal as found on the input connectors. The set labeled High Pass Out has a high pass filter applied which has a corner frequency of 80Hz and a slope of -12 dB per octave.
The output connectors are typically used to either daisy-chain additional subwoofers with a single, unfiltered output, or as the input to a power amplifier for the Left and Right main channels with no filtering or the 80Hz High Pass applied depending on which set of connectors are used."
Même si je ne pars pas sur ce modèle d'ampli tube, le fait d'être sûr de pouvoir utiliser mon caisson sur un ampli dépourvu de sortie dédiée sub m'ouvrirait pas mal de possibilités !
chakiwi -> J'écoute vraiment de tout selon mes humeurs...
pascal -> es-tu sur que je ne puisse pas intercaler le sub entre source et ampli ? Voici ce que dit la doc du sub :
"Alternatively, especially for two-channel preamps that don’t have (or don’t use) any digital management, the typical connectivity scenario would be to use both the main channel Left and Right (L/R) inputs into the STA400D. In this case the subwoofer would sit between the main L/R low level outputs of the preamp and the L/R low level inputs of the STA-400D, with the L/R outputs of the STA-400D going to the inputs of the power amplifier for the system’s L/R main speakers"
ou encore
"Outputs
There are two sets of output connectors on the STA-400D. One set (labeled Line Out) is unfiltered and carries the same signal as found on the input connectors. The set labeled High Pass Out has a high pass filter applied which has a corner frequency of 80Hz and a slope of -12 dB per octave.
The output connectors are typically used to either daisy-chain additional subwoofers with a single, unfiltered output, or as the input to a power amplifier for the Left and Right main channels with no filtering or the 80Hz High Pass applied depending on which set of connectors are used."
Même si je ne pars pas sur ce modèle d'ampli tube, le fait d'être sûr de pouvoir utiliser mon caisson sur un ampli dépourvu de sortie dédiée sub m'ouvrirait pas mal de possibilités !