Aucun logiciel ne fera jouer le dp3 en gapless en dlna, ses réactions sont bien trop lentes à cause de son firmware vérolé, il restera toujours un lag.
Si vous désirez obtenir une police plus grande afin de mieux lire sur l'écran du Dp3, j'ai trouvé un site Russe dans lequel un hacker a pu modifier le firmware, voici les modifs apportées (traduites automatiquement du Russe) :
Font changed, its color and size changed. Changed the background window in the player by default (when there is no picture from the album). My network balls are registered.
Unpack the firmware as described above, change the balls to your own, edit everything else you want, pack, flash.
Changes from 03/29/2019:
1. Raised access to the terminal via SSH. In a terminal program (I use PuTTY), specify the IP address of your Dp3 (the assigned IP address can be viewed on the device on which DHCP is running and which IP addresses are distributed on your network, in my case it is a router), specify the SSH protocol, connect, login -admin, password - 123 Get terminal access to your Dp3. Executing privileged commands through sudo. After entering, you can change the password.
2. Raised access to the Dp3 file system via FTP. Now all the changes can be done on the fly (change pictures, fonts, fit balls, etc.). Start FTP client (I use Total Commander, Network menu - Connect to an FTP server - Add - Enter any connection name, server: ip address of your Dp3, account: admin, password: 123. Click OK - Connect). Get access to the file system. If you need to edit something, copy the file to your computer, edit, return to the place with a replacement.
3. I got a change in the ethernet MAC address after each Dp3 reboot (because of this, my router assigns a new IP address every time). Prescribed a hard MAC address. If you want to change it to your own, edit the file \ etc \ init.d \ S92_03_start_music_player, everything is clear there, in principle. You can edit via FTP, as described in paragraph 2
4. Changed the timeout before mounting the ball to 10 seconds, it seems to be enough.
5. Commented out the connection of network resources in \ etc \ init.d \ S99__99__end, to whom it is necessary - uncomment and write down their own.
L'adresse du fil :
https://forum.ixbt.com/topic.cgi?id=95:609
ci-joint deux photos de l'écran de mon dp3 après le flashage, on peut lire bien plus facilement
![[Image: bd23ab40d436bbd30bb44d06b7446290.md.jpg]](https://tof.cx/images/2019/09/22/bd23ab40d436bbd30bb44d06b7446290.md.jpg)
![[Image: e1193d2100dd820555ea84f190d4fc1b.md.jpg]](https://tof.cx/images/2019/09/22/e1193d2100dd820555ea84f190d4fc1b.md.jpg)
Si vous désirez obtenir une police plus grande afin de mieux lire sur l'écran du Dp3, j'ai trouvé un site Russe dans lequel un hacker a pu modifier le firmware, voici les modifs apportées (traduites automatiquement du Russe) :
Font changed, its color and size changed. Changed the background window in the player by default (when there is no picture from the album). My network balls are registered.
Unpack the firmware as described above, change the balls to your own, edit everything else you want, pack, flash.
Changes from 03/29/2019:
1. Raised access to the terminal via SSH. In a terminal program (I use PuTTY), specify the IP address of your Dp3 (the assigned IP address can be viewed on the device on which DHCP is running and which IP addresses are distributed on your network, in my case it is a router), specify the SSH protocol, connect, login -admin, password - 123 Get terminal access to your Dp3. Executing privileged commands through sudo. After entering, you can change the password.
2. Raised access to the Dp3 file system via FTP. Now all the changes can be done on the fly (change pictures, fonts, fit balls, etc.). Start FTP client (I use Total Commander, Network menu - Connect to an FTP server - Add - Enter any connection name, server: ip address of your Dp3, account: admin, password: 123. Click OK - Connect). Get access to the file system. If you need to edit something, copy the file to your computer, edit, return to the place with a replacement.
3. I got a change in the ethernet MAC address after each Dp3 reboot (because of this, my router assigns a new IP address every time). Prescribed a hard MAC address. If you want to change it to your own, edit the file \ etc \ init.d \ S92_03_start_music_player, everything is clear there, in principle. You can edit via FTP, as described in paragraph 2
4. Changed the timeout before mounting the ball to 10 seconds, it seems to be enough.
5. Commented out the connection of network resources in \ etc \ init.d \ S99__99__end, to whom it is necessary - uncomment and write down their own.
L'adresse du fil :
https://forum.ixbt.com/topic.cgi?id=95:609
ci-joint deux photos de l'écran de mon dp3 après le flashage, on peut lire bien plus facilement
Desktop PC et Macbook -> Digione Signature + SMSL DP3 -> Dac RME adi2 -> Ampli Audio GD Master 3 > JBL 4430 et 4312